Here you find a video and a description of how to dismount and mount the battery pack of your Ekano 2 AL / Sresh CF.
Important: When mounting the battery, the lock must be opened with a 4 mm Allen key. Otherwise, there is a risk of damaging the lock.
You can also find detailed instructions here:
Dismounting the battery pack:
- Insert a 4 mm hex key into the opening above the battery cover and turn it clockwise half a turn. The battery pack falls into the latch of the removal position.
- Grasp the battery lock with one finger and press the release lever to the left. The battery can now be removed downwards.
Mounting the battery pack:
- Place the lower end of the battery on the lower guide and swing the battery up until you hear a click. The battery is now locked to prevent it from falling out.
- Insert a 4 mm hex key into the opening above the battery cover, turn it clockwise half a turn and hold it in this position.
- Push the battery completely into the down tube and remove the hex key.
- Check the tight and secure fit of the battery.
If you have further questions, you can also use our chat or write an email to service@propain-bikes.com.